Accommodations

• 1x Master Cabin on Maindeck
• 2x VIP Cabin, Double
• 2x Twin Cabin with Pullman
• 3 x Crew Cabins for 6 crew

Audio / Visual Equipment

• Antenna TV SAT KVH M9 with standard receiver in saloon
• Bose amplifier with remote control and HQ loudspeakers
• 2 x Multimedia A/V PC Seamphony unit

Generators

• Generators: 2 x Kohler 40kW
• Generator hrs : Approx. 6000 hrs each (August 2024)

Tankage

• Grey Water Capacity: 700 lt
• Black Water Capacity: 700 lt

Ancillary Equipment

• Bow and stern thrusters (Hydraulic)
• Tropical air conditioning (saloon + cabins + 3 crew)
• TRAC Fin Stabilizer under way
• Watermaker: Idromar 360 /h

Safety and Security Equipment

• CCTV: thermal camera/dual professional Flir Pan/Tilt Zoom M626

Communication Equipment

• Telephone interface GSM/GPRS voice/fax
• VHF Furuno GMSS/DSC class A “IMO” with antenna
• VHF Furuno remote station for interiors class A
• VHF Furuno 2721 independent including antenna system
• VHF Furuno 2721 series remote station for interiors/fly

Navigation Equipment

• GPS position tracker via Inmarsat paradox
• 8 Common interface receivers (4 standard)
• Additional Furuno Echo Box
• Echosounder Interphase SE 200A BB+keypad
• Monitor VGA/VideoIn for Navnet BB e tvcc 12.1”

Deck Equipment

• Davit with gross loading 1000 kg diff from 600 kg stern
• 6 x Light Underwater

Tender

• Crew Tender 320, 15 HP outboard

Refit 2024-2025

OUTSIDE THE BOAT AND CHANGES

1- Topside paint, upper hull gelcoat repair and polishing

2- Upperdeck rear side (front side of the crane) chrome handrail extension

3- Maindeck handrail edge sika changes and polishing with teak oil

4- All exterior area upholstery fabric changes and stamovit cover

5- Sundeck and upperdeck fifer awning

6- Captain's cabin windows fifer renewal

7- All fender covers renewal

8- Uperdeck table and chair set, rear seating group and center table

9- Sundeck new seating group and coffee table

10- Maindeck two seating groups, one round coffee table and one rectangular large coffee table

11- Re-leather covering of fender hangers

12- Change of staircase lamps

13- All exterior area LED lighting done

14- Cover on the garage complete paint teak refit was done

15- Antenna covers were painted black

16- Illuminated writing was made on the back / names were made for swallows

17- Deck was sanded and the places that needed renovation were done

18- Teak part behind the garage door was completely renewed

19- Boat rods were painted

20- Faucets on the deck were changed

21- Shower system extending to the platform (inside the garage) was renewed

22- Windlass was completely maintained and polished

23- Cover of the port at the front was renewed

24- Stern station control Morse arm was renewed

CHANGES MADE IN BOAT INTERIOR

1- Parquets were completely polished

2- Carpets were changed

3- Uperdeck lounge seating group cover was renewed and center table was covered with leather

4- Lounge seating group was renewed, center table was renewed

5- Lounge table and chairs were renewed

6- All interior curtains were renewed

7- All interior LED lighting made

8- All cabin toilets were renewed

9- All internal taps were renewed

10- All trash can brushes were renewed

11- All bathroom, toilet, sink edge marbles were cleaned and renovations were made

12- All beds were changed

13- All bed covers, pillows and duvet covers were renewed

14- All leather areas in the captain's cabin were painted and renovated

15- Kitchen countertop, sink were renewed

16- Stove, oven, coffee machine were renewed

17- Extractor fan was cleaned

18- Air conditioner fan coils were cleaned

19- Mirror wall covering was made on the side of the living room table

20- Wall coverings at the VIP cabin entrance were changed

21- A sliding trash can was made instead of the garbage disposer in the kitchen

22- Kitchen cabinet doors were painted

23- Cracked leather wall coverings at the personnel entrance were changed (3 pieces)

24- Furniture touch-up paints were made

25- Faulty cabinet door stopper locks were changed

MECHANICAL - ELECTRICAL - ELECTRONICS

1- Shaft, propeller, tiller, bearing feeders and Line adjustments were made.

2- Generator injectors were changed, condensate cleaning was done. Periodic all service was done.

3- Engine and transmission service was done, concert cleaning was done.

4- Bilge and engine room covers were painted.

5- Water maker membranes were changed, low and high pressure pump maintenance was done, hoses were changed.

6- Emergency fire pump maintenance was done, it is working.

7- Bowthruster oil leaking hose was changed.

8- Hydrophore pump maintenance was done and pressure tank was changed.

9- Waste water pump maintenance was done.

10- Air conditioning compressors were removed, pump maintenance was done, since there was no drain hole under the ceiling, a drain was made under the ceiling and part paint polishing was done.

11- New Epirp device purchased

12- Liferaft maintenance, SART maintenance, pyrotechnical material renewal, fire extinguisher maintenance and one portable CO2 addition

13- Two smoke sensors renewal

14- Tracvısıon multisvıch renewal

15- Valve installation controls

16- Anchor chain galvanized

17- Uperdeck and aft pool speaker replacement

18- Boat internet installation

ONGOING WORKS

1- Starboard engine speed reduction after 2000 rpm

2- Paseralla system

3- Three glass replacement in front of the captain's cabin

4- Teak coating replacement on the edge of the aft pool rear seating group

5- Automation control

TO

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.